Physics based Prognostics of Solder Joints in Avionics
##plugins.themes.bootstrap3.article.main##
##plugins.themes.bootstrap3.article.sidebar##
Abstract
Applicability of a physics based prognostics approach for solder joints using microstructural damage models is investigated. A modified deformation mechanism map for the solder alloys is introduced where grain boundary sliding (GBS) plays a dominant role during creep deformation. The high homologous temperature of solder as well as the combined thermal-vibration cycling experienced during typical operating missions necessitates the use of a combined creep-fatigue failure approach. In this work, a PCB consisting of a heat generating chip with Ball-Grid Array (BGA) solder joints is considered for avionics application. A prognostics based Life Cycle Management approach was used to perform the mission analysis, FEA, thermal-mechanical stress analysis and damage accumulation analysis. The remaining useful life (RUL) is predicted for different rupture strains. The uniqueness of this approach lies in the use of microstructure based damage models and consideration of both material and mission variability to predict the RUL under actual usage. The life critical nodes were observed near the junction of the solder joints with the substrate due to high disparities in their coefficients of thermal expansion. In addition, the probabilistic analysis was also performed by randomly varying the grain size and fitting a two-parameter Weibull distribution to the failure data. The model calibration and the results show some practical trends that need to be verified through future experimentation. The simulation results demonstrate the viability of using a physics-based approach for the prognosis of solder joint failures in avionics.
How to Cite
##plugins.themes.bootstrap3.article.details##
avionics, Solder joint, microstructure, finite element, remaining life
Gu, J., & Pecht M. (2010). Prognostics and Health Assessment Implementation for Electronics Products, Journal of the IEST, vol. 53, no. 1, pp. 44-58.
Joo, D. K., Jin Y., & Shin S. W. (2003), Creep rupture of lead-free Sn-3.5Ag-Cu solders, Journal of electronic materials, vol. 32, No. 6, pp 541-547.
Kalgren, P . W ., Baybutt, M., Ginart, A., Minnella, C,
Roemer, C. M. J., & Dabney T. (2007). Application of prognostic health management in digital electronic systems, IEEE Aerospace Conference, pp. 1-9.
Koul, A. K., Bhanot, S., Tiku, A., & Junkin B. (2007). Importance of Physics-Based Prognosis for Improving Turbine Reliability: RRA 501KB Gas Turbine Blade Case Study, ASME 2007 Power Conference, San Antonio, Texas, USA.
Koul, A. K., Immarigeon, J. P. & Wallace, W. (1994). Microstructural Control in Ni-Base Superalloys. In Advances in High Temperature Structural Materials and Protective Coatings (95-125). National Research Council of Canada, Ottawa.
Kovacevic, I. F., Drofenik, U., & Kolar J. W. (2010). New physical model for lifetime estimation of power modules, International Power Electronics Conference, ETH, Zurich, pp. 2106-2114.
Mohamed, F. A. & Langdon, T. G. (1974). Deformation Mechanism Maps Based on Grain Size. Metallurgical Transactions, 5, 2339-2345.
Nasser, L., Tryon, R. & Dey A. (2005). Material simulation- based electronic device prognosis, IEEE Aerospace Conference, pp. 3579-3584.
Neu, R., & Sehitoglu, H. (1989), Thermomechanical fatigue, oxidation, and Creep: Part II. Life prediction, Metallurgical and Materials Transactions A, vol. 20, pp. 1769-1783.
Saha, B., Celaya, J. R., Wysocki, P. F., & Goebel K. F. (2009). Towards prognostics for electronics components, IEEE Aerospace Conference, Big Sky, MT, pp. 1-7.
Shi, X. Q., Wang, Z. P., Yang, Q. J., & Pang H. L. J. (2003). Creep behavior and deformation mechanism map of Sn-Pb eutectic solder alloy, Journal of Engineering Materials and Technology, ASME, vol. 125, pp. 81 - 87.
Smith, S. D. (2004). Cockpit seat and pilot helmet vibration during flight operations on aircraft carriers, Aviation, Space, and Environmental Medicine, vol. 75, no. 3, pp.247-254.
Tang, H., & Basaran C. (2003). A damage mechanics-based fatigue life prediction model for solder joints, Transactions of the ASME, Journal of electronic packaging, vol. 125, pp.120-125.
Wong, T. E., Lau, C. Y., & Fenger H. S. (2004). CBGA solder joint thermal fatigue life estimation by a simple method, Soldering & Surface Mount Technology, 16/2,41–45.
Wadsworth, J., Ruano, O. & Sherby, O. (2002). Denuded zones, diffusional creep, and grain boundary sliding. Metallurgical and Materials Transactions A, Chemistry
and Materials Science, 33(2), 219-229.
Wu, X. J., & Koul A. K. (1995). Grain boundary sliding in the presence of grain boundary precipitates during transient creep, Metallurgical and Materials Transactions A, vol. 26, pp. 905-914.
Wu, X. J., Yandt, S. & Zhang, Z. (2009). A Framework of Integrated Creep-Fatigue Modelling. Proceedings of the ASME Turbo Expo 2009 (GT2009-59087), June 8-12, Orlando, Florida, USA.
The Prognostic and Health Management Society advocates open-access to scientific data and uses a Creative Commons license for publishing and distributing any papers. A Creative Commons license does not relinquish the author’s copyright; rather it allows them to share some of their rights with any member of the public under certain conditions whilst enjoying full legal protection. By submitting an article to the International Conference of the Prognostics and Health Management Society, the authors agree to be bound by the associated terms and conditions including the following:
As the author, you retain the copyright to your Work. By submitting your Work, you are granting anybody the right to copy, distribute and transmit your Work and to adapt your Work with proper attribution under the terms of the Creative Commons Attribution 3.0 United States license. You assign rights to the Prognostics and Health Management Society to publish and disseminate your Work through electronic and print media if it is accepted for publication. A license note citing the Creative Commons Attribution 3.0 United States License as shown below needs to be placed in the footnote on the first page of the article.
First Author et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.